MOD-025-2 Real and Reactive Capability Verification

Task 1: Documentation Review and Data Collection

• Advise you on data requirements and provide guidance on data collection to ensure alignment with NERC MOD-025-2 requirements. Data may include: generator nameplate ratings (MW/MVAR), manufacturer test reports, prior test results, excitation and governor control system data.
• Review the provided data and provide feedback on the accuracy, consistency, and usability of the data.

Task 2: Support Generator Test Procedure Development and Day-Of Testing (as Needed)

• Provide supplemental support for generator test procedure development consistent with MOD-025-2 Attachment 1 including testing gross and net real/reactive power verification and reactive capability curve plotting.
• Coordinate with plant operations team for day-of testing support, as needed.

Task 3: Active and Reactive Power Capability Verification

• Gather test data and conduct an analysis of the tested generator capability against nameplate and expected values.
• Record and plot all documentation as needed per Attachment 2 of MOD-025-2.
• Analyze whether unit(s) meets or deviates from capability and document any specific issues.
• Engineering analyses may be used, but are not required, to determine the expected applicable Facility capabilities under less restrictive system voltages, if a voltage limit is hit.

Task 4: MOD-025-2 Evidence Package Preparation

• Prepare full evidence documentation package, including: test procedures, plots and test data, supporting calculations and test equipment calibration records, completed Attachment 2 forms for your submittal to the Transmission Planner and Compliance Enforcement Authority (CEA).